Bowie, TX
When your AC isn't keeping up, we diagnose the actual cause and fix it right the first time. Locally owned and operated.
If any of these sound familiar, it's worth having someone take a look.
The system runs but the air coming out isn't cold. Often points to a refrigerant problem or a compressor that isn't engaging.
The unit turns on and off in quick bursts instead of running a full cooling cycle. It wears the equipment and drives up power use.
Air trickles from the registers even at full fan speed. Usually a blocked filter, a duct issue, or a failing blower motor.
Visible frost on the refrigerant lines or indoor coil means airflow or refrigerant charge is off. Running it iced up can damage the compressor.
A clogged condensate drain backs up and can spill into the space around the air handler.
Grinding, squealing, or hard clicking at startup usually means a mechanical part is failing rather than simply being dirty.
A system losing efficiency runs longer to hit the same temperature, and the cost shows up before the breakdown does.
An air conditioner doesn't make cold air — it moves heat. Refrigerant absorbs heat from indoor air as it evaporates in the indoor coil, gets compressed outside, and releases that heat to the outdoor air as it condenses. The cool air you feel is the byproduct of heat leaving the building.
That's why airflow and refrigerant charge matter so much. If either is off, the refrigerant can't complete the cycle properly: too little heat absorbed and the coil ices, too little heat released and pressures climb. Most cooling failures trace back to one of those two conditions, which is also why a system can run constantly and still not cool.
Refrigerant doesn't get consumed — if it's low, it leaked. Topping off without finding the leak means it comes back.
A small component that gives the motor the jolt it needs to start. One of the most common failures in hot climates.
The outdoor coil sheds heat. Packed with dust, grass, or cottonwood, it can't, and head pressure climbs.
Algae and dust clog the drain line. Many systems have a safety switch that shuts the unit down when the pan fills.
The electrical switch that engages the outdoor unit. Pitted contacts cause intermittent no-cool calls that are hard to catch.
Moves air across the coil. As it weakens, airflow drops and the coil is more likely to freeze.
We look at what's going on and explain what we find before any work begins.
We walk through the options and give you an honest recommendation for your situation.
The job gets done thoroughly and professionally.
You see the results before we leave, and we answer any questions.
Every job is different. These are the things that move the number up or down.
Almost always restricted airflow or low refrigerant. A dirty filter, closed vents, a weak blower, or a leak will each drop coil temperature below freezing and let condensation turn to ice.
It depends on the age of the system, what failed, and whether the refrigerant it uses is still readily available. We'll give you the honest comparison rather than defaulting to replacement.
Refrigerant isn't consumed in normal operation, so if it's low there's a leak. Adding more without finding the leak means paying for the same repair again.
Contact us and we'll take a look at what you need. Quotes are free.
New air conditioning system installation, sized and installed for lasting performance.
Learn more →Furnace and heating system repair to get your home back up to temperature.
Learn more →New furnace installation, sized and vented correctly for your home.
Learn more →Tell us what you need — we'll take a look and give you a straight answer.
